Table of Contents
Do you have an aged window that wants to be changed? Now I am going to present you how I am updating an aged aluminum window and setting up a new double pane vinyl window in our basement rest room. Thanks to DAP for sponsoring this submit, all opinions are ours — see our entire disclosure plan below.
Our Birch Home is an older home, so we have been carrying out lots of updates to modernize the house. From updating the mantel and fireplace, to setting up new flooring and a new kitchen and pantry, to receiving rid of the pink bathtub — it’s been a number of yrs of jobs but it’s coming jointly! (We’ve put in a lot of get the job done in the property, also!)
This job is in our basement rest room, which we have been performing on for awhile now. The very last point we showed you was introducing the cement board close to the rest room for the new tile.
Just before we get also a great deal extra into the rest room remodel, it was a good time to switch the aged aluminum window with a new double pane vinyl window. The aged window was installed in the 50’s and is not incredibly electrical power productive.
The good thing is, our window isn’t around the vanity/sink place like this one — but this sliding mirror was a clever remedy if we did have that difficulty!
Installing a Window in a Basement Bathroom
What is the cost to switch an aged window?
$one hundred twenty for the new vinyl Jeldwen window and DAP supplies to make it temperature limited.
How a great deal time does it just take?
It took us about 3 hours from start out to finish including
- eradicating the aged aluminum window
- cleaning the window house
- setting up the new window
- caulking to make the window temperature limited
How to measure the for the new window
Evaluate the peak and huge on the exterior and subtract one/4″ to an one/2″. That will give you the closing dimensions of the window.
For this new rest room window, I purchased a vinyl window without the need of fins on the sides because I was introducing wooden trim close to it. It took about a 7 days or extra to decide on up the window, because it was a tailor made order.
Get our recommendations for buying new windows below.
What You’ll Need: Changing an Outdated Window in a Basement Bathroom
Materials Record
This submit is made up of affiliate one-way links. Master extra and study our entire disclosure policy here.
Equipment Required
How to Remove an Outdated Window and Put in a New Window
one. Remove aged current window.
I had to cut out the body with a metallic reciprocating noticed blade. Right after producing the cuts, I utilized the hammer to pry it all out.
If you have an aged wooden window and can get rid of it in one piece, below are some tips for what to do with aged windows.
two. Thoroughly clean and prep the window place cost-free from dust and particles.
Remove any grime, dust and aged caulk from the aged window.
three. Dry healthy new window.
I manufactured sure that the window I purchased healthy in the house. Phew! Evaluate twice, order as soon as!
four. Add wooden trim.
Since this window is in the basement concrete wall, I extra redwood trim. We like performing with redwood because it’s a long lasting wooden that’s by natural means rot- and temperature-resistant — we use it in nearly all our outdoor jobs, from our deck to our new elevated yard bins. (See redwood concrete bench, yard arbor, and pergola, also.)
I glued a redwood body in put with DAP DynoGrip. I needed anything to very easily to drill into to keep the window in put.
four. Level the window.
I utilized a compact degree to make sure it was degree in the opening. I was lucky, because the wooden body that I manufactured was just suitable and I didn’t require to use shims to degree it.
6. Check window to make sure it opens very easily.
Make sure you slide the window open up and closed to test that it operates right after it’s degree.
7. Screw the new window to the wooden body.
I utilized one one/2″ screws to connect the vinyl window to the wooden body. Just make sure the screw head is a flat head that doesn’t get in the way of the window opening and closing.
Then I coated the screw heads with the caps that come with the window. It seems pleasant and tends to make the window monitor easier to keep clean up, also.
6. Seal with foam.
I utilized DAP Contact ‘N Foam to near all the gaps of the window each on the inside and exterior.
7. Seal with Caulk
Right after the foam dried I utilized DAP Window Trim Caulk to seal off the exterior of the window to keep the drinking water out.
Associated Reading through: How to Put in Craftsman Window Trim
Now I require to start out performing on the tile to finish off this rest room! We’re still choosing on the finishes for this rest room — we could do some enjoyable moroccan type fish scale tile like this, or some modern hexagon tile… lots of options!
Remain tuned for extra rest room remodel to come — and you can see where this rest room commenced below and how we installed the cement board below.
Extra Diy window updates:
Associated
More Stories
What are the most expensive homes sold in Elk Grove East of Hwy 99?
What Is Fee Simple In Real Estate?
How Schneider Electric’s ‘returnship’ aims to support women at work